Line Keys and Softkeys92 41-001382-05 REV03 – 07.2014Empty KeyYou can set a softkey to force a blank entry on the IP phone display for a specific softkey. You do this by setting thesoftkey to "empty". The softkeys are added in order (from softkey1 to softkey20) after any hard-coded keys have beenadded. If a particular softkey is not defined, it is ignored.Configuring an Empty KeyUse the following procedure to configure an Empty softkey on the 9480i phone.Aastra Web UI1. Click Operation->Softkeys and XML.Softkeys2. Select from "Key 1" through "Key 20".3. In the "Type" field, select Empty.4. Check (enable) or uncheck (disable) the states you want to apply to this softkey.5. Click Save Settings.
