Softkey/Programmable Key/Feature Key/Expansion Module Key ParametersA-202 41-001160-03, Rev 00, Release 2.4IP Phone Administrator GuideProgrammable Key Settings for 9143i, 6753i, and 6755i• The value of "N" for the following parameters is dependent on the number ofprogrammable keys available on the phone models. See the table on page 192for the applicable values.Parameter –prgkeyN typeType(in Web UI)Aastra Web UI Operation->Programmable KeysConfiguration Files aastra.cfg, .cfgDescription The type of programmable key to configure. Valid types are:• none - Indicates no setting for programmable key.• line - Indicates programmable key is configured for line use.• speeddial - Indicates programmable key is configured for speeddialuse. You can configure a programmable key to speeddial a specificnumber by pressing that key. Optionally, you can also configure aspeeddial key to dial prefix numbers. With this option, the prefixnumbers automatically dial when you press the programmable key,and the phone waits for you to enter the remaining numbers to dial.Note: When there is an active call, the speeddial keys send DTMFdigits through the active voice path. To dial out, you have to first putthe active call on hold and then press the speeddial key.• dnd - Indicates programmable key is configured for do not disturbon the phone. This option is "Do Not Disturb" in the Aastra WebUI).• blf - Indicates programmable key is configured for Busy Lamp Field(BLF) use. User can dial out on a BLF configured key.• list - Indicates programmable key is configured for BLF list use.User can dial out on a BLF List configured key. You can also use the“BLF List URI” parameter to specify a URI for the phone to accessfor the BLF List.• acd - (for Sylantro Servers only) Indicates the programmable key isconfigured for auto call distribution (called “Auto Call Distribution”in the Aastra Web UI). The ACD feature allows the Sylantro serverto distribute calls from a queue to registered IP phone users(agents).• dcp - (for Sylantro Servers only) Indicates the programmable key isconfigured for either directed call pickup or group call pickup (called“Directed Call Pickup” in the Aastra Web UI). The Directed CallPickup/Group Call Pickup feature allows you to intercept or pickup acall on a monitored extension or a group of monitored extensions.• xml - Indicates programmable key is configured to accept an XMLapplication for accessing customized XML services. You can alsospecify an XML softkey URL for this option.• webapps - Indicates the key is hardcoded to access an AastraXML-based application (xml.myaastra.com). This option is alsoaccessible from the Services menu on the 6751i, 6753i, and 9143i.Draft 1
