Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard KeyA-166 41-001343-02 REV05 – 07.2014Option to Remove the “More” Softkey when Not RequiredIncrease of Displayed Characters for Softkey Line LabelsNote:Applicable to the the 9480i, 9480i CT, 6735i, 6737i, 6739i, 6755i, 6757i, 6757i CT IP, and 6867i IP phones only.Parameter –collapsed more softkey screenConfiguration Filesaastra.cfg, .cfg, .cfgDescription Controls how softkeys are displayed on the 9480i, 9480i CT, 6735i, 6737i, 6739i, 6755i,6757i, 6757i CT IP, and 6867i IP phones’ screens when the number of softkeysconfigured matches the exact number of softkey buttons on the phone.By default, when a total of six softkeys are configured for the 9480i, 9480i CT, 6735i, and6755i IP phones, the screen displays five softkeys and offers a “More” option to accessthe remaining softkey. When this parameter is enabled, the “More” softkey is removedallowing the phones to display all six configured softkeys on one screen.The same behavior is applied to the 6735i, 6757i and 6757i CT IP phones when six topsoftkeys or six bottom softkeys are configured, when a total of 12 softkeys areconfigured for the 6739i IP phone, as well as when 6 top softkeys or 4 bottom softkeysare configured for the 6867i.Format IntegerDefault Value 0 (Disabled)Range 0-10 (Disabled)1 (Enabled)Example collapsed more softkey screen: 1Note:Applicable to the 6735i, 6737i, 6755i, 6757i, and 6757iCT IP Phones only.Parameter–line icon disabledConfiguration Filesaastra.cfg, .cfg, .cfgDescription Disable the line icon (circle) displayed in front of the softkey line label. This allows thesoftkey line label to be displayed with up to 10 characters (label will not be shortenedand no ellipsis characters will appear).Format BooleanDefault value 0Range 0-10 (disabled)1 (enabled)Example line icon disabled: 1
