Operational Features41-001343-02 REV05 – 07.2014 5-184Park/Pick Up Static and Programmable ConfigurationThe IP phones (including the CT handsets) have a park and pickup call feature that allows you to park a call and pickup acall when required. Administrators can configure call park and pickup using a static configuration (for 8 and 11-Line LCDphones) or by using a programmable configuration (3-Line, and 8 and 11-Line LCD phones).Administrators can use configuration files or the Aastra Web UI to configure a park/pickup static or programmable config-uration. Users can make changes to customize the label and the state of the park/pick up keys using the Web UI.The IP phones support the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ PBX servers.The following paragraphs describe the static and programmable configuration of the call park and pickup feature.Park/Pickup Static ConfigurationThe static method configures park and pickup on a global basis for all supported IP phones. You can use the configurationfiles or the Aastra Web UI to configure a park/pickup static configuration. In the configuration files, you use the followingparameters to statically configure park/pickup: “sprecode” and “pickupsprecode”.In the Aastra Web UI, you use the following fields at Basic Settings -> Preferences to configure park/pickup statically:• Park Call• Pick Up Parked CallHow it Displays on the PhoneOn the phone UI, the static configuration method displays the following:• When a call comes in and you pickup the handset, the default label of “Park” displays on the first screen of the phone UI.• After pressing the “Park” softkey to park the call, the default label of “Pickup” displays on the first screen of the phoneUI.The values you enter for the Park/Pickup feature are dependant on your type of server. The following table provides thevalues you enter for the “sprecode” and “pickupsprecode” parameters (configuration files), or "Park Call" and "PickupParked Call" fields (Aastra Web UI).Notes:• The 8 and 11-LCD phones accept both methods of configuration, however to avoid redundancy, Aastra recommendsyou configure either a static configuration or a programmable configuration.• When using the IP phones with the BroadSoft BroadWorks call manager, an enhanced park/pickup configurationmethod is also available to be used. For more details see “Enhanced Park/Pickup Configuration Method (BroadSoftBroadWorks)” on page 5-192Note:On the 6739i, you can configure Park/Pickup softkeys using the IP Phone UI also. For more information, see the AastraModel 6739i IP Phone User Guide.Note:This feature does not work when the “collapsed context user softkey screen” parameter is enabled (see “Shifting ofSoftkey Positions for Busy States” on page 5-117).Notes:On the 6757i CT handset, pressing Ïdisplays the “Park” and “Pickup” labels.
