90Display Error code DescriptionEC,E03Timeout errorIf the timeout parameter is set to "t-Up1", the balance did notreceive the next character of a command within the time limitof one second. Confirm the communication.EC,E04Excess characters errorThe balance received excessive characters in a command.Confirm the command.EC,E06Format errorA command includes incorrect data.Example:The data is numerically incorrect.Confirm the command.EC,E07Parameter setting errorThe received data exceeds the range that the balance canaccept. Confirm the parameter range of the command.Other error code If an error described above can not be released or othererrors are displayed, contact the local A&D dealer.19-3. Other DisplayWhen this indicator blinks, automatic self calibration is required. Theindicator blinks when the balance detects changes in ambienttemperature. If the balance is not used for several minutes with thisindicator blinking, the balance performs automatic self calibration. Theblinking period depends on the operating environment.Advise The balance can be used while this indicator is blinking. Werecommend that you perform automatic self calibration for precisionweighing.19-4. Asking For RepairIf the balance needs service or repair, contact your local A&D dealer.The balance is a precision instrument. Use much care when handling the balance andobserve the following when transporting the balance.Use the original packing material for transportation.Remove the draft gate, weighing pan and pan support from the main unit before placing thebalance in the shipping container.
