4210-5-1. Description of the Data Format Added to the Weighing DataID number dout 5-id 1The number to identify a specific balance.This format consists of seven characters excluding the terminator.Data number dout d-no 1This format outputs the data number just before the data is transmitted using the RS-232Cinterface.This format consists of six characters excluding the terminator.When CSV format (5if type 5) is selected, the period ( . ) is replaced with a comma ( , ).Date dout 5-td 2 or 3The date output order can be changed in "Clock (Cl adj)".The year is output in a four-digit format.Note GF-K series does not use this format.Time dout 5-td 1 or 3This format outputs time in 24-hour format.Note GF-K series does not use this format.Tare valueWhen the tare value in memory is recalled, the tare value is output before the weighing data.Comparison resultsBy setting "Comparison results (Cp-r)" of the function table to "1", the comparison resultscan be added to the data output using the RS-232C serial interface. Use A&D standardformat (type 0).The comparison results are added after the header in A&D standard format as below.NoteWhen the data described above is added to the weighing data, the output is in thefollowing order: ID number, Data number, Date, Time and Weighing data.Data number TerminatorTare value recalled from memoryNet valueHeader Data Unit TerminatorComparison resultWhen the comparison result is HIWhen the comparison result is OKWhen the comparison result is LONot applicable
