AEG SKD71813C0 User Manual

Contents

AEG SKD71813C0 User Manual Manual pdf 11 page image

7. OPTIONSDesired options must beactivated every time beforeyou start a programme(except for Multitab).It is not possible to activate ordeactivate options while aprogramme is running.7.1 XtraDryActivate this option when you want toboost the drying performance. With theuse of this option, the duration of someprogrammes, water consumption and thelast rinse temperature can be affected.The option XtraDry is not a permanentoption and must be selected at everycycle.How to activate XtraDryPress XtraDry.The related indicator comes on.If the option is not applicable to theprogramme, the related indicator does notcome on or it flashes quickly for a fewseconds and then goes off.The display shows the updatedprogramme duration.7.2 TimeSaverThis option increases the pressure and thetemperature of the water. The washingand the drying phases are shorter.The total programme duration decreasesby approximately 50%.The washing results are the same as withthe normal programme duration. Thedrying results can decrease.How to activate TimeSaverPress TimeSaver, the related indicatorcomes on.If the option is not applicable to theprogramme, the related indicator does notcome on or it flashes quickly for a fewseconds and then goes off.The display shows the updatedprogramme duration.8. BEFORE FIRST USE1. Make sure that the current level ofthe water softener agrees with thehardness of the water supply. Ifnot, adjust the level of the watersoftener.2. Fill the salt container.3. Fill the rinse aid dispenser.4. Open the water tap.5. Start a programme to remove anyprocessing residuals that can still beinside the appliance. Do not usedetergent and do not load thebaskets.When you start a programme, theappliance can take up to 5 minutes torecharge the resin in the water softener. Itseems that the appliance is not working.The washing phase starts only after thisprocedure is completed. The procedurewill be repeated periodically.8.1 The salt containerCAUTION!Only use salt specificallydesigned for dishwashers.The salt is used to recharge the resin inthe water softener and to assure goodwashing results in the daily use.How to fill the salt container1. Turn the cap of the salt containercounterclockwise and remove it.2. Put 1 litre of water in the salt container(Only for the first time).3. Fill the salt container with dishwashersalt.ENGLISH 11