AEG SCT51800S0 User Manual

Also see for SCT51800S0: User manual User manual User manual

Contents

AEG SCT51800S0 User Manual Manual pdf 12 page image

Problem Possible cause SolutionProducts prevent that wa-ter flows into the watercollector.Make sure that productsdo not touch the rearplate.Water flows on theground.The melting water outletdoes not flow in the evap-orative tray above thecompressor.Attach the melting wateroutlet to the evaporativetray.The temperature inthe appliance is toolow.The temperature regula-tor is not set correctly.Set a higher temperature.The temperature inthe appliance is toohigh.The temperature regula-tor is not set correctly.Set a lower temperature.Many products are storedat the same time.Store less products at thesame time.The temperature inthe refrigerator istoo high.There is no cold air circu-lation in the appliance.Make sure that there iscold air circulation in theappliance.The temperature inthe freezer is toohigh.Products are too near toeach other.Store products so thatthere is cold air circulation.6.1 Replacing the lamp1 21. Switch off the appliance.2. Press on the rear hook and at thesame time slide the cover in the di-rection of the arrow.3. Replace the lamp with one of thesame power and specifically de-signed for household appliances.(the maximum power is shown onthe lamp cover).4. Slide the lamp cover into its originalposition.5. Switch on the appliance.6. Open the door. Make sure that thelight comes on.6.2 Closing the door1. Clean the door gaskets.2. If necessary, adjust the door. Referto "Installation".3. If necessary, replace the defectivedoor gaskets. Contact the ServiceCenter.12 www.aeg.com