18 818 42 69-00/2Temperature DisplayThe temperature display can indicate several piecesof information.• During normal operation, the temperature currently present in therefrigerator (ACTUAL temperature) is displayed.• When the temperature is being adjusted a flashing display indicatesthe fridge compartment temperature currently set (DESIRED temper-ature).• If there is a fault in the appliance the temperature display shows asquare or a letter in the temperature display.ALARM OFF buttonWith the ALARM OFF button, the acoustic warning signalcan be switched off, e.g. the "Open Door" warning whensorting in or out, the food to be chilled.Prior to Initial Start–Up1 Before connecting the appliance to the mains and starting it for thefirst time, leave the appliance to stand for 30 minutes if wastransported upright. After transporting it on its side, the appliancemust be left to stand for 2 hours before switching it on. This isnecessary to allow the refrigerant to flow back into the compressor.Otherwise the compressor may be damaged.0 1. Please clean the appliance interior and all accessories prior to initialstart-up (see section: “Maintenance and Cleaning”).2. The appliance must be correctly installed in accordance with the chap-ter "Installation" before it is switched on for the first time. Care shouldbe especially taken that the mains voltage and frequency available cor-respond with the appliance’s rating plate.