AEG BPE842720B User Manual

Also see for BPE842720B: User manual User manual

Contents

AEG BPE842720B User Manual Manual pdf 39 page image

11.4 Cleaning ReminderWhen reminder is displayed cleaning isnecessary. Use the function PyrolyticCleaning.11.5 Removing and installingthe doorYou can remove the door and theinternal glass panels to clean it. Thenumber of glass panels is different fordifferent models.WARNING!The door is heavy.1. Open the door fully.2. Fully lift up the clamping levers (A) onthe two door hinges.AA3. Close the door until it is at an angleof approximately 45°.45°4. Hold the door with one hand on eachside and pull it away from the oven atan upwards angle.5. Put the door with the outer sidedown on a soft cloth on a stablesurface.6. Hold the door trim (B) on the topedge of the door at the two sidesand push inwards to release the clipseal.12BCAUTION!Rough handling of the glass,especially around the edgesof the front panel, can causethe glass to break.7. Pull the door trim to the front toremove it.8. Hold the door glass panels on theirtop edge one by one and pull themup out of the guide.9. Clean the glass panel with water andsoap. Dry the glass panel carefully.When the cleaning is completed, do theabove steps in the opposite sequence.Install the smaller panel first, then thelarger and the door.WARNING!Make sure that the glassesare inserted in the correctposition otherwise thesurface of the door mayoverheat.Make sure that you put the glass panels(C, B and A) back in the correctsequence. First, insert panel C, which hasa square printed on the left side and atriangle on the right side. You will alsofind those symbols embossed on thedoor frame. The triangle symbol on theglass must match the triangle on thedoor frame, and the square symbol mustmatch the square. After that insert theother two glass panels.ENGLISH 39