AEG BP730402K User Manual

AEG BP730402K User Manual Manual pdf 16 page image

When the set time ends, an acousticsignal sounds for two minutes.flashes. The appliance deactivates.6. Touch a sensor field or open thedoor to stop the acoustic signal.9. USING THE ACCESSORIESWARNING!Refer to Safety chapters.9.1 Core temperature sensorThere are two temperatures to be set:the oven temperature and the coretemperature.The core temperature sensor measuresthe core temperature of the meat. Whenthe meat is at the set temperature, theappliance deactivates.CAUTION!Only use the coretemperature sensor suppliedor the correct replacementparts.The core temperature sensormust stay in the meat and inthe socket during thecooking.1. Activate the appliance.2. Put the point of the core temperaturesensor (with on the handle) intothe centre of the meat.3. Put the plug of the core temperaturesensor into the socket at the front ofthe appliance.The display shows flashing and thedefault set core temperature. Thetemperature is 60 °C for the firstoperation, and the last set value for eachsubsequent operation.When you put the coretemperature sensor into thesocket, you cancel thesettings for the clockfunctions.4. Touch or to set the coretemperature.5. Touch or the settings saveautomatically after 5 seconds.You can set the coretemperature only whenflashes. If is in thedisplay but does notflash before you set thecore temperature, touchand or to seta new value.6. Set the oven function and the oventemperature.The display shows the current coretemperature and the heat up symbol .While the appliance calculates theapproximate duration time, the displayshows the count up time. After the firstcalculation the display shows theapproximate duration of the cookingtime.The appliance continues to calculate theduration during the cooking. The displayupdates at intervals with the newduration value.www.aeg.com16