AEG BP730402K User Manual

AEG BP730402K User Manual Manual pdf 12 page image

6.3 Setting the oven function1. Activate the appliance with or .The display shows the set temperature,the symbol and the number of the ovenfunction.2. Touch or to set an ovenfunction.3. Touch or the appliance startsautomatically after five seconds.If you activate the applianceand do not set an ovenfunction or programme, theappliance deactivatesautomatically after 20seconds.6.4 Changing the temperatureTouch or to change thetemperature in steps of 5 °C.When the appliance is at the settemperature, an acoustic signal soundsthree times and the Heat up indicatorgoes out.6.5 Checking the temperatureYou can see the temperature in theappliance when the function orprogramme operates.1. Touch .The Temperature / Time display showsthe temperature in the appliance.2. Touch to go back to the settemperature or the display shows itautomatically after five seconds.6.6 Fast heat up functionDo not put food in the ovenwhen the Fast heat upfunction operates.The Fast heat up function is not availablewith every oven function. An acousticsignal sounds if the Fast heat up functionis not available for the set function ifFaulty tone is activated in the "Settingsmenu".The Fast heat up function decreases theheat up time.To activate the Fast heat up functiontouch and hold for more than threeseconds.If you activate the Fast heat up function,the bars on the display flash one byone and comes on to show thatthe function operates.7. CLOCK FUNCTIONS7.1 Clock functions tableClock function ApplicationCOUNT UP TIMER To set the count up, which shows how long the appli-ance operates. This function has no effect on the opera-tion of the appliance.TIME OF DAY To show the time of day. To change the time of day, re-fer to "Setting the time".DURATION To set how long the appliance operates.END To set when the appliance deactivates. You can use Du-ration and End at the same time (Time delay) if you wantthe appliance to activate and deactivate automaticallylater.SET+GO To start the appliance with necessary settings with onlyone touch of the sensor field any time later.www.aeg.com12