AEG BP5013001 User Manual

Also see for BP5013001: User manual

AEG BP5013001 User Manual Manual pdf 29 page image

11.2 Shelf supportsRemoving the shelf supportsYou can remove the shelf supports toclean the side walls.1. Pull the front of the shelf supportaway from the side wall.122. Pull the rear end of the shelf sup-port away from the side wall and re-move it.Installing the shelf supportsInstall the shelf supports in the oppositesequence.Valid for telescopic runners:The retaining pins on the tele-scopic runners must point to thefront.11.3 LampWARNING!There is a risk of electrical shock.The lamp and the lamp glasscover can be hot.Before you change the lamp:• Deactivate the appliance.• Remove the fuses from the fuse box ordeactivate the circuit breaker.CAUTION!Put a cloth on the bottom of theinterior of the appliance. It pre-vents damage to the lamp glasscover and the cavity.Always use the same lamp type.Replacing the lamp at the cavityceiling:1. Turn the lamp glass cover counter-clockwise to remove it.2. Clean the glass cover.3. Replace the lamp with a suitable 300°C heat-resistant lamp.4. Install the glass cover.ENGLISH 29