AEG 49669GO-MN User Manual

AEG 49669GO-MN User Manual Manual pdf 9 page image

9INstAllING yoUr oVEN AccEssorIEsprior to installing accessories, remove allpackaging and remove plastic film fromexternal panelscatalytic linerscatalytic liners are coated with a specially formulatedenamel coating this porous coating enables the “selfcleaning” process – see cleaning your appliancesection for more details catalytic liners must beinstalled first but you can omit them, if you wish, withno effect to cooking performance their sole purpose isto make oven cleaning easier• The catalytic liners will attach to each side of youroven there will be a left hand and right handversion this is marked on the panel• Position the first liner as per the diagram. The black,shiny side of the liner should be facing the ovenwall, the hooks pointing down and the word ‘lh’positioned to the top rear portion of the oven theright hand side will be a mirror image of this• Line the hooks up with the slots provided in theoven wall, push them in and then allow the liner toslide down to its final position• The access hole for the side racks should be visiblewhen the liner is correctly positioned – see diagramside racksthe side racks that come with your oven are fitted inthe following manner• Insert the 2 rear pegs into the holes provided.• Locate the front peg into the front access hole andpush in firmlyshelves and traysthe shelves are designed so that they have maximumtravel but cannot be accidentally pulled right out thetrays are designed in the same way and fit straight intothe side racks• Locate the rear edge of the shelf / tray in between2 guide rails of the side rack – see diagram Ensurethe same rail positions on both sides of the oven arebeing engaged• With the front edge raised, begin to slide the shelfinto the oven• Once the indents have passed the front edge of theside rack, the shelf can be pushed completely in• When fully inserted the shelf / tray should notinterfere with the closed doorto fit a shelf or try to telescopic sides:1 with the slides fully pushed in, push the shelf or trayalong the top of the slide until it hits the back post2 Drop the front of the shelf or tray onto the slideensuring it sits behind the front post of the slidewhen fully inserted the shelf / tray should notinterfere with the closed oven door