Screw Compressor Central Chiller Chapter 4: Operation 53Viewing Chiller Pump StatusNote: If your chiller system was configured to operate the pump(s) of thechilled water pump tank, the user may view the status of the processand recirculation pumps.To view the status of the pumps, start from the Main Menu, then:1. Press the Up or Down buttons to highlight “Chilled Water Pump TankConfiguration”.2. Press The Chilled Water Pump Tank Configuration Screen appears:Figure 6: Chilled Water Pump Tank Configuration ScreenOnly pumps that are included in the system will be shown on this screen. Pumps will displayone of the following states:1. OFFLINE – This indicates that the pump has been turned off in the pumpenable/disable screen. The pump will not be called to operate until it has been re-enabled. The color code for this indication is red.2. READY – Indicates that the pump is enabled and ready to run. However, the currentnumber of pumps specified to run does not require this pump to operate. The colorcode for this indication is yellow.
