ADEMCO galaxy 8 User Manual

ADEMCO galaxy 8 User Manual Manual pdf 25 page image

170 = OMIT ZONES[ent] to Select88 = CODES[ent] to SelectPIN + ententCODES1 = User Codesent001 USERL3ðent[ent] to Select1 = Modify PINent001 PIN> 5678entIndicatesDual Code001 USER z zL3001 PIN> #5678Selecting CodesEnter the QUICK MENU. Press key 8 followed by the ent key.User CodesWhen the Codes option has been selected, press key 1 to access UserCodes. Display each of the user numbers using key A>. Each usernumber offers options for PIN, level, name and where applicable timezones and groups. When the user number to be modified is displayed,press the ent key to access the Modify Pin option.Modify PinThe Modify Pin option allows a pin to be assigned to a user or anexisting PIN to be modified. The PIN must be a four, five or six digitnumber that is unique to the system. If a duplicate PIN is assigned, themessage Duplicate Entry is displayed. As each digit is entered itappears on the bottom line of the display. Pressing the * key erasesthe last digit displayed. Continued pressing of the *key will erase all ofthe digits. When the correct PIN has been assigned press the ent keyto accept the programming and return to the previous menu level.When a PIN has been assigned to a user number, a solid box (n) isdisplayed on the line of the user number details screen.• Deleting a PinExisting PIN entries can be completely erased using the * keyinstead of a digit entry. When there is no PIN assigned to a usernumber a hollow square (o) is displayed in the top line of theusers details screen.• Assigning Dual CodesTo program a user code as a Dual Code press the # key whiletheModify PIN option is selected. The # displays at the start ofthe assigned user PIN e.g. #5678. When a PIN has been as-signed as a dual code two solid boxes (nn) are displayed in thetop line of the users details screen.• Dual Codes OperationEntry of a single dual code cannot gain access to the menu, setor unset the system. The message NO ACCESS – ADDI-TIONAL CODE is displayed. A second dual code must beentered within 60 seconds to access the menu, set or unset thesystem. Dual codes can be of different levels. The highest levelcode entered determines the access level to the system.• Galaxy 60, 128, 500, 504 & 512A single entry of a dual code, without a second dual code entrywithin 60 seconds, results in an Illegal Code record in theEventLog. All outputs programmed as Illegal Code are activated.