ADEMCO VISTA-40 User Manual

Also see for Ademco VISTA-40: Installation instructions User guide Installation supplement Programming guide

ADEMCO VISTA-40 User Manual Manual pdf 45 page image

– 45 –QUICK GUIDE TO SYSTEM FUNCTIONSFUNCTION PROCEDURE COMMENTSCheck Zones Press [Q ] . To view faulted zones when system not ready.Display All Press and hold [Q ] Displays all alpha descriptors programmed by installer.Descriptors for 5 seconds(Alpha Keypads only)Arm System Enter code. Arms system in mode selected.Press arming key desired.(AWAY, STAY, INSTANT,MAXIMUM)Disarm System Enter code. Disarms system and silences alarms.Press OFF [1].Bypass zones Enter code. Bypassed zones are unprotected and will not cause an alarmPress BYPASS [6]. if violated.Enter zone numbers to bebypassed (use 2-digit entries).Quick Bypass Enter code. Bypasses all faulted zones automatically.Press BYPASS [6] + [#].Chime ModeTo turn ON or OFF: Enter code, Keypad will sound if doors or windows are violated while thepress CHIME [9] key. system is disarmed.Test ModeTo turn ON: Enter code and Sounds alarm sounder momentarily, and allows sensors to bepress TEST [5] key. tested.To turn OFF: Enter code andpress OFF keyView Messages Press and hold [0] for at least Message from the central station will appear.(Alpha Keypads only) 5 seconds.View User Capabilities Enter user's code. Displays partitions & authority levels assigned to the user.(Alpha Keypads only) Press [Q ] + [Q].