ADEMCO VISTA-20SEA User Manual

ADEMCO VISTA-20SEA User Manual Manual pdf 26 page image

– 26 –SECURITY CODES (Continued)To Add a User orChange a User'sCodeChanging theMaster CodeFollow the procedure forchanging a user’s code,but enter user #02. Youwill be prompted to enterthe new code a secondtime to confirmaccuracy.Important: Temporary users of the system (e.g., babysitters, cleaning staff, etc.) should not beshown how to use any system function they do not need to know, such as bypassing protectionzones for example.Sequential key depressions for all steps in a procedure must be made within 2 seconds of oneanother, or else the entire entry is aborted and must be repeated from its beginning (e.g.,perform steps 1, 2, and 3 below with no delay between steps).CODE1. + 8 ENTER MASTER CODE THEN PRESS CODE KEY(Master Code) Example: 7 2 9 6 then press the CODE key.2. ENTER USER NUMBER(User Number) Enter the 2-digit User Number (03-16) for the user youare adding or changing.3. ENTER USER'S CODE(User's Code) Enter the new 4-digit security code for that user.CODETo Delete a User 1. + 8 ENTER MASTER CODE THEN PRESS CODE KEY(Master Code) Example: 7 2 9 6 then press the CODE key.2. ENTER USER NUMBER(User Number) Enter the 2-digit User Number (03–16) for the user whosecode you are deleting.3. STOP. Wait (about 3 seconds) until the keypad beeps once beforepressing any other key. The code is automatically deleted.