ADEMCO VISTA-20SEA User Manual

ADEMCO VISTA-20SEA User Manual Manual pdf 23 page image

– 23 –USING DEVICE COMMANDSGeneral Information Your system may be set up so that certain lights or other devices can be turned on or off byusing the device command from the keypad. Ask your installer if this has been done in yoursystem. If programmed for your system, some devices may activate automatically upon certainsystem conditions. In this case, the following commands can be used to override the deviceactivation. See your installer for a full explanation of this feature.To activate devices ENTER SECURITY CODE THEN PRESS # + 7 + DEVICE NUMBER+ # + 7 +(Security Code) (Device Number)Example: 7 2 9 6 then press # , then press 7 , then enter the numberrepresenting the device you wish to activate. See your installer for device numbers assignedfor your system.To deactivatedevicesENTER SECURITY CODE THEN PRESS # + 8 + DEVICE NUMBER+ # + 8 +(Security Code) (Device Number)Example: 7 2 9 6 then press # , then press 8 , then enter the numberrepresenting the device you wish to deactivate. See your installer for device numbers assignedfor your system.Device Description Device Description1 52 63 74 8