– 14 –Entry/Exit DelaysGeneral InformationYour system has preset time delays, known as exit delay and entrydelay. Whenever you arm your system, exit delay gives you time toleave through the designated exit door without setting off an alarm.Exit delay begins immediately after entering any arming command,and applies to all modes of arming protection. If programmed, a slowbeeping will sound throughout the exit delay period.Entry Delay gives you time to disarm the system when you reenterthrough the designated entrance door. But the system must bedisarmed before the entry delay period ends, or an alarm will occur.The keypad will beep during the entry delay period, reminding you todisarm the system. You can also arm the system with no entry delayat all by using either INSTANT or MAXIMUM arming modes. Thesemodes provide greater security while on the premises or while awayfor extended periods of time. See your installer for your delay times.
