28 Products in the AdderLink AV200 rangeThe following items are available within the AdderLink AV200 product range:• AdderLink AV200 pair (part number: ALAV200P)One AdderLink AV200T transmitter and one AdderLink AV200R receiver.• AdderLink AV200 transmitter (part number: ALAV200T)Single AdderLink AV200T transmitter.• AdderLink AV200 receiver (part number: ALAV200R)Single AdderLink AV200R receiver.• AdderLink AV201 receiver (part number: ALAV201R)Single AdderLink AV201R receiver.• AdderLink AV204 transmitter (part number: ALAV204T)Single AdderLink AV204T transmitter.• AdderLink AV208 transmitter (part number: ALAV208T)Single AdderLink AV208T transmitter.• Replacement 5.3VDC power supply (part number: PSU-ALAV-IEC)One auto-voltage sensing power supply with country specific IEC cable• Rack mount chassis (part number: ALAV-RMK-CHASSIS)One 19” chassis is 3U high and capable of accommodating up to sixteenAdderLink AV transmitter or receiver modules.• AV200/AV201 rack mount plate (part number: ALAV-RMK-FASCIA)• AV204/AV208 rack mount plate (part number: ALAV-RMK-FASCIA2)CablesThese cables are available for use when connecting the modules to systems andperipherals:• Video cable - 2 metres (part number: VSC18)• Audio cable - 3.5 metres (part number: VSC22)• Serial cable - 9 way male to 9 way female D-type, 2 metres(part number: CAB-9M/9F-2M)• Serial Y-cable - 9 way female D-type splitting to two 9 way maleD-type connectors (part number: VSC19) - pinout shown below.337772622555898834RXRXRTSRTSRTSTXDSRTXTXGNDGNDGNDCTSRICTSCTSRXDTR9way D-typefemale‘A’ connector9way D-typemale‘B’ connector9way D-typemaleABY-cable pinoutUsed to split serial communications between twodisplays. For use only on AV200R or AV201R receiverswhen linked to AV204T or AV208T transmitters.