ACTi KCM-7911 Hardware Manual

Also see for KCM-7911: Hardware user manual Installation guide Installation guide

Contents

ACTi KCM-7911 Hardware Manual Manual pdf 21 page image

www.acti.comHardware Manual21Other ConnectionsThis section describes the procedures in preparing the external devices that you can connectto the camera. The camera supports DC12V power input, Digital Input and Output (DI/DO) andAudio Input and Output devices using the bundled terminal blocks. The use of these devices,however, is optional.Connecting a Power Adaptor (Optional)The camera consumes 9.6W power when powered by a Power over Ethernet (PoE) switchthat is IEEE802.3af compliant. In case of using a non-PoE switch or your PoE switch haslimited power supply, you can purchase a power adaptor and directly connect the camera to apower outlet. The power adaptor must be connected to the supplied terminal block before use.To do this, follow the procedures below:1. Loosen the screws of the 12V and GND pins of the power terminal block.2. Take note that a standard power adaptor cable has two (2) different wires:White stripe: Connects to 12V PinConnects to GND Pin