ACTi KCM-7911 Hardware Manual

Also see for KCM-7911: Hardware user manual Installation guide Installation guide

Contents

ACTi KCM-7911 Hardware Manual Manual pdf 18 page image

www.acti.comHardware Manual18Waterproof Solution with ConduitThis section describes the procedures to waterproof the cabling connections using a flexibleconduit with 3/8” trade size (not supplied). This is the recommended solution when connectingan external power adaptor, audio in/out, or digital input/output (DI/DO) devices to the camera.1. Disassemble the cable gland as shown below:2. Pull the Ethernet cable and other cables (if any) through the flex conduit.NOTE: To connect an external power adaptor, audio in/out, or digital input/output (DI/DO)devices, insert the cables without connectors through the flex conduit together with theEthernet cable at this point.3. Insert the clamping nut through the flex conduit.LockNutBody(with Washer) SealingRubberClampingNut