© Acronis, Inc 6710. Standalone deploymentStandalone deployment is deployment on a computer isolated from a network or included in a networkwithout Acronis Snap Deploy infrastructure, to be exact, without Acronis OS Deploy Server. Standalonedeployment is performed locally using the bootable Acronis Standalone Utility.The Acronis Universal Deploy option is not available in the standalone mode.Steps:1. Install Acronis Snap Deploy Management Console.2. Create bootable media with Acronis Master Image Creator and Acronis Standalone Utility.Acronis Standalone Utility can be placed on a physical media only. This component is notdesigned to boot from a PXE server.The Acronis standalone components to be placed on the bootable media3. Configure and image the master system. Save the image on a network share, detachable orremovable media, because internal hard disks of the target computer cannot be accessed duringthe standalone deployment.4. Boot the target computer into Acronis Standalone Utility.5. Attach or insert the media if the master image or files to transfer are located on the media.Acronis Standalone Utility can deploy images located:- in network shared folders- on USB and FireWire (IEEE-1394) storage devices (hard drives, flash drives) attached to themanaged computer- on DVD+R/RW, DVD-R/RW, CD-R/RW loaded in the managed computer media drive.The image created on removable media has to fit into one media disk. To deploy an imagespread over several CDs, DVDs or other media, copy all parts of the image to the same folderon an external drive or a network share.
