ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual

Also see for SNAP DEPLOY 3 - FOR WORKSTATION: Installation guide Datasheet Datasheet

Contents

ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual Manual pdf 23 page image

© Acronis, Inc 233. Installation3.1 System requirementsThe Acronis Snap Deploy components can be installed on computers running the following operatingsystems:The type of license required for theAcronis Snap Deploy ManagementAgent installationMS Windows Server 2008 (TBD)SMS Windows Server 2003 Service Pack 2 (x86, x64)SMS Windows Server 2003 R2 (x86, x64)SMS Windows Small Business Server 2003SMS Windows Storage Server 2003 R2SMS Windows Server 2003 x64 EditionsSMS Windows 2000 ServerSMS Windows 2000 Advanced ServerSMS Windows 2000 Professional SP4WSMS Windows Vista Home Basic (x86, x64)WSMS Windows Vista Home Premium (x86, x64)WSMS Windows Vista Business (x86, x64)WSMS Windows Vista Ultimate (x86, x64)WSMS Windows XP HomeWSMS Windows XP ProfessionalWSMS Windows XP Professional x64 EditionWSMS Windows XP Professional SP2WS* - S – server license, WS – workstation license.3.2 Used ports and IP addressesThe Acronis OS Deploy Server and the Acronis Snap Deploy Management Console use the followingports and IP addresses for remote operation:- UDP port: 9876- TCP port: 9876, if busy, choose a port at random- IPv4 multicast address: 239.255.219.45- Acronis Snap Deploy Management Console UDP port: 9877, if busy, choose a port at randomThe Acronis PXE Server uses the following ports and IP addresses:- UDP port: 67, 68, 69.- Broadcast address: 255.255.255.255For a remote installation, the TCP port 25001 is used.If you are using a firewall, you might have to set the appropriate access options.