ABB MU 80 Product Manual

Contents

ABB MU 80 Product Manual Manual pdf 20 page image

1.3.4 Work inside the working range of the robotWARNINGIf work must be carried out within the work area of the robot, then the followingpoints must be observed:• The operating mode selector on the controller must be in the manual modeposition to render the three-position enabling device operational and to blockoperation from a computer link or remote control panel.• The maximum speed of the robot is limited to 250 mm/s when the operatingmode selector is in the position Manual mode with reduced speed. Thisshould be the normal position when entering the working space.The position Manual mode with full speed (100%) may only be used bytrained personnel who are aware of the risks that this entails. Manual modewith full speed (100%) is not available in USA or Canada.• Pay attention to the rotating axes of the robot. Keep away from axes to notget entangled with hair or clothing. Also, be aware of any danger that maybe caused by rotating tools or other devices mounted on the robot or insidethe cell.• Keep clear of moving parts so that limbs, hands, or fingers do not get trappedor crushed by the robot.• To prevent anyone else from taking control of the robot, always put a safetylock on the cell door and bring the three-position enabling device with youwhen entering the working space.WARNINGNEVER, under any circumstances, stay beneath any of the robot's axes! Thereis always a risk that the robot will move unexpectedly when robot axes are movedusing the three-position enabling device or during other work inside the workingrange of the robot.20 Product manual - Motor Units and Gear Units3HAC040148-001 Revision: K© Copyright 2011 -2018 ABB. All rights reserved.1 Safety1.3.4 Work inside the working range of the robot