ABB ACS350 User Manual

Also see for ACS350 Series: User manual User manual Installation instructions Installation instructions Installation instructions

ABB ACS350 User Manual Manual pdf 23 page image

Mechanical installation23Mounting the drive and hygienic installationAttach the drive to the wall using back mounting.Note: To fulfill the requirements for hygienic installation, leave enough free spacearound the drive. See Free space around the drive for more information.Note: Make sure that dust from drilling does not enter the drive during theinstallation.1. Mark the locations for the holes (4 pcs) using e.g. the mounting template. Thelocations of the holes are also shown in the drawings in chapter Dimensions.2. Fix the screws or bolts to the marked locations.3. Position the drive onto the screws on the wall.4. Tighten the screws in the wall securely.Attaching the optional fieldbus moduleSee the ACS350 Userís Manual.Installing the pressure compensation valve (optional, +C169)1. Remove the M12 plug from the gland plate.2. Tighten the pressure compensation valve with its back nut to a torque of 0.8 N∑m.1 2