ABB ACS350 Installation Instructions Manual

Also see for ACS150 series: User manual User manual User manual User manual Installation instructions

ABB ACS350 Installation Instructions Manual Manual pdf 1 page image

ACS350 and ACS150MUL1-R3 Installation Instructions© 2005 ABB Oy. All Rights Reserved. 3AFE68620023 rev. B / 7.12.200512. Fasten the gland box frame to wall with four M4 screws (notincluded).21. Fasten the gland box frame to drive with two M4×12 screws.4. If control cables or fieldbus option modules will be installed,remove the detachable lid (4) from the gland box cover.4WARNING! Before installing MUL1-R3option, read the safety instructions andmechanical and electrical installationinstructions in the drive user’s manual.Follow the instructions when installing,operating and servicing the drive. Ifignored, physical injury or death mayfollow, or damage may occur to thedrive, motor or driven equipment.3. If using FPBA-01 or FCAN-01 option module, remove partfrom gland box frame by bending it.35. With any fieldbus option module except FRSA-00, install theoption grounding plate to the gland box frame. See Mechanicalinstallation in the drive manual.5

/ 2

Related manuals for ABB ACS150 series