ABB ACS350 User Manual

Also see for ACS350 Series: User manual User manual Installation instructions Installation instructions Installation instructions

ABB ACS350 User Manual Manual pdf 13 page image

About the manual13About the manualWhat this chapter containsThe chapter describes the intended audience and compatibility of this manual. It alsocontains a flowchart of steps for checking the delivery and installing andcommissioning the drive. The flowchart refers to chapters/sections in this manualand the ACS350 Userís Manual.ScopeThis supplement is intended to be used with the ACS350 Drives (0.37...22 kW,0.5...30 HP) Userís Manual (3AFE68462401). The supplement covers differencesbetween the standard ACS350 and the ACS350 with IP66 casing (option +B063).The following chapters can only be found in the userís manual:ï Planning electrical installationï Start-up, control with I/O and ID Runï Control panelsï Application macrosï Program featuresï Actual signals and parametersï Fieldbus control with embedded fieldbusï Fieldbus control with fieldbus adapterï Fault tracingCompatibilityThe manual is compatible with the ACS350 drive firmware version 2.57b or later.See parameter 3301 FIRMWARE in the ACS350 Userís Manual.Intended audienceThis manual is intended for persons who plan the installation, install, commission,use and service the drive. Read the manual before working on the drive. The readeris expected to know the fundamentals of electricity, wiring, electrical componentsand electrical schematic symbols.This manual is written for readers worldwide. Both SI and imperial units are shown.Special US instructions for installations in the United States are given.