86 CHAPTER 8: SYSTEM EVENTSConfiguring SNMPTrapsTo configure SNMP Traps using the Web interface:1 Log in to the Web interface.2 Click Device View on the Toolbar.3 Select System -> Management -> Events -> SNMP Traps in theNavigation Tree. The SNMP Trap Destination Setup screen is displayed.4 Enter the IP address of the network management station in your networkthat will handle the SNMP traps in the IP Address of Management Stationfield.The community string of the network management station is set to“monitor”. You can only change this default setting using the CommandLine Interface; for more information, see “Setting the Webcache SNMPCommunity String” on page 124.Caching Disk Failed A cache storage device within the Webcache has failed.You have to return the unit to 3Com.System Error The Webcache can no longer function as a cache due tohardware failure.SNMP Trap Description
