130 CHAPTER 13: P ROBLEM S OLVINGThe terminal or terminal emulator can no longer access theWebcache over the network.Check that the connections and network cabling for the LAN port are inplace.If there is still a problem, try accessing the Webcache through a differentport. If you can now access the Webcache, a problem may have occurredwith the original port. Contact your supplier for further advice.Accessing theWebcache viaTelnetYou cannot access the Webcache using Telnet.Check that: The network cables are secure. The network cable used to access the Webcache is connected to theLAN port. The Port Activity LED on the Webcache LAN port is Green or GreenFlashing. The duplex settings are as expected by the rest of your network. You can ping the Webcache. The terminal or terminal emulator is set to VT52 or VT100 mode. Press Return a few times to wake up the CLI.Solving WebInterface ProblemsThe Web interface is not displayed in the Web browser.The Web interface can be accessed by any browser that conforms to thefollowing W3C standards: HTML 4.0, CSS 1.0, DOM, ECMA 262. Todisplay the Web interface correctly, use one of the following Webbrowsers: Microsoft Internet Explorer v4.0 Microsoft Internet Explorer v5.0 Microsoft Internet Explorer v5.5 Netscape Communicator v4.5 Netscape Communicator v4.6 Netscape Communicator v4.7Netscape Navigator version 6 is not supported by the Webcache.
