3Com 3CRWX120695A Installation And Basic Configuration Manual

Also see for 3CRWX120695A: User guide User guide Command reference Configuration guide Command reference

Contents

3Com 3CRWX120695A Installation And Basic Configuration Manual Manual pdf 13 page image

Hardware Features 13Figure 2 WX4400 Switch—Front Panel Control FeaturesLike the WX1200, the rear of the WX4400 contains a label with the serialID, MAC address, and other identifying information.ManagementFeatures■ Serial console port—The serial console port provides a directmanagement connection to a WX switch’s command-line interface(CLI). The port has a DB-9 female connector and supports theEIA-232D signaling standard.■ Status LEDs—The Ethernet ports and power supplies have LEDs thatindicate their status. The management CPU on a WX4400 switch alsohas an LED. (For details, see “Status LEDs” on page 14.)■ Flash card slot (WX4400 only)—The flash card slot is not used fornormal WX operation.Power Features ■ Power supplies—A WX4400 switch comes with one 100-240 VACautosensing AC power supply. You can add a second supply for loadsharing and redundancy. The power supplies are hot-swappable.A WX1200 switch contains one 100-120 VAC / 200-240 VACautosensing AC power supply. The WX1200 power supply is afixed-configuration supply and cannot be inserted or removed.Network Interfaces ■ 10/100 Ethernet ports—A WX1200 switch has eight 10/100BASE-TXEthernet ports. Each port has a standard RJ-45 connector and usesCategory 5 (Cat 5) cable based on the EIA/TIA-586 standard.100-240V50/60 Hz8A MAXDISCONNECTALL POWERBEFORESERVICINGGigabitlinkLEDsGBIC slotAC powerinletPowersupplyPower supplyserial numberPowersupply LEDSerialconsole portFlashcard slotEjectbuttonMgmtLED1000BASE-TX portMgmtConsole