OneStart

Menu

Fujitsu PRIMERGY CX400 M4 manuals

PRIMERGY CX400 M4 first page preview

PRIMERGY CX400 M4

Brand: Fujitsu | Category: Server
PRIMERGY CX400 M4 first page preview

PRIMERGY CX400 M4

Brand: Fujitsu | Category: Server
Table of contents
  1. server enclosure
  2. copyright and trademarks
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Introduction
  10. Notational conventions
  11. Before you start
  12. Classification of procedures
  13. Upgrade and Repair Units (URU)
  14. Field Replaceable Units (FRU)
  15. Average task duration
  16. Tools you need at hand
  17. Documents you need at hand
  18. Documents for the server enclosure
  19. Documents for the server nodes
  20. Important information
  21. ENERGY STAR
  22. Environmental protection
  23. Basic hardware procedures
  24. Determining the error class
  25. Global Error indicator
  26. Shutting down the server node
  27. Disconnecting the power cord
  28. Extending/removing the server enclosure out of the rack
  29. Extending the server enclosure out of the rack
  30. Removing server nodes from the server enclosure
  31. Removing the CX2570 M4 server node
  32. Removing the server node dummy module
  33. Opening the server enclosure
  34. Opening the midplane cover
  35. Installing the midplane cover
  36. Installing the fan cover
  37. Installing the server node dummy module
  38. Installing the server node in the server enclosure
  39. Installing the CX2550 M4/CX2560 M4 server node
  40. Installing the CX2570 M4 server node
  41. Mounting the server enclosure in the rack
  42. Attaching the carrier rails to the server enclosure
  43. Installing the carrier rails
  44. Lift the server into the rack cabinet
  45. Installing the cable management arm (CMA)
  46. Connecting the power cord
  47. Switching on the server node(s)
  48. Basic software procedures
  49. Completing the maintenance task
  50. Verifying system information backup / restore
  51. Using the Chassis ID Prom Tool
  52. Viewing and clearing the System Event Log (SEL)
  53. Clearing the SEL
  54. Performing a fan test
  55. Updating ServerView RAID Manager
  56. Power supply unit (PSU)
  57. General equipping rules
  58. Replacing the hot-plug PSU
  59. Removing the hot-plug PSU
  60. Installing the hot-plug PSU
  61. Concluding steps
  62. Removing and installing the PSU dummy module
  63. Installing the PSU dummy module
  64. Hard disk drives (HDD), solid state drives (SSD) and 2.5-inch PCIe-SSD
  65. Basic information
  66. HDD/SSD install order
  67. HDD/SSD backplane types
  68. HDD/SSD cage bezels
  69. Installing 2.5-inch HDD/SSD modules
  70. Removing a 2.5-inch HDD/SSD dummy module
  71. Installing a 2.5-inch HDD/SSD module
  72. Removing 2.5-inch HDD/SSD modules
  73. Removing a 2.5-inch HDD/SSD module
  74. Installing a 2.5-inch HDD/SSD dummy module
  75. Replacing a 2.5-inch HDD/SSD module
  76. Preliminary steps
  77. Replacing the 2.5-inch HDD/SSD SAS/SATA backplane
  78. Removing the fan modules cage
  79. Removing the 2.5-inch HDD/SSD backplane
  80. Installing the 2.5-inch HDD/SSD backplane
  81. Installing the fan modules cage
  83. Installing the HDD/SSD bridge board
  86. Replacing the HDD/SSD bridge board
  87. Removing the HDD/SSD bridge board
  90. Changing HDD/SSD cage bezels
  91. Removing the HDD/SSD x6 front bezel
  92. Removing the HDD/SSD x6 front bezel (screw type)
  93. Removing the HDD/SSD x4 front bezel
  94. Installing the HDD/SSD x6 front bezel
  95. Installing the HDD/SSD x4 front bezel
  97. System fan module
  99. Replacing the system fan module
  100. Removing the fan module
  101. Installing the fan module
  103. Replacing the fan cable
  104. Disconnecting the fan cable
  105. Connecting the fan cable
  107. Midplane kit
  109. Replacing the midplane kit
  110. Removing the midplane kit
  111. Installing the midplane kit
  113. Front panel
  115. Replacing the left front panel
  116. Removing the front panel
  117. Installing the front panel
  119. Replacing the right front panel
  122. Replacing the left front panel cable
  123. Removing the front panel cable
  124. Installing the front panel cable
  126. Replacing the right front panel cable
  130. Cabling
  132. Appendix
  133. Rear overview with CX2550 M4 / CX2560 M4 server nodes
  134. Rear overview with CX2570 M4 server nodes
  135. Enclosure interior
  136. Controls and indicators
  137. Indicators on the front panel (enclosure-related)
  138. Indicators on the front panel (node-related)
  139. ID card
  140. Indicators on the HDDs
  141. Indicator on hot-plug PSU
  142. Fan indicators
  143. Minimum startup configuration
PRIMERGY CX400 M4 first page preview

PRIMERGY CX400 M4

Brand: Fujitsu | Category: Server
Table of contents
  1. server enclosure
  2. copyright and trademarks
  3. Table Of Contents
  4. Table Of Contents
  5. Introduction
  6. Documentation overview
  7. Notational conventions
  8. Functional overview
  9. Server enclosure specification
  10. Installation steps, overview
  11. Important information
  12. ENERGY STAR
  13. FCC Class A Compliance Statement
  14. Environmental protection
  15. Transporting the server enclosure
  16. Notes on installing the server enclosure in the rack
  17. Hardware installation
  18. Unpacking the server enclosure
  19. Installing/removing the server enclosure in/from the rack
  20. Mounting the server enclosure in the rack
  21. Removing the server enclosure out of the rack
  22. Connecting the server enclosure to the mains
  23. Notes on connecting/disconnecting cables
  24. Starting up and operation
  25. Front overview with CX2560 M4 / CX2570 M4 server nodes
  26. Rear overview with CX2550 M4 or CX2560 M4 server nodes
  27. Rear overview with CX2570 M4 server nodes
  28. Controls and indicators
  29. Indicators on the front panel (enclosure-related)
  30. Indicators on the front panel (node-related)
  31. ID card
  32. Indicators on the HDDs
  33. Indicator on hot-plug PSU
  34. Switching the multi-node server system on and off
  35. Cleaning the server enclosure
  36. Property and data protection
  37. Troubleshooting and tips
  38. Drives reported as "dead" when starting system
PRIMERGY CX400 M4 first page preview

PRIMERGY CX400 M4

Brand: Fujitsu | Category: Enclosure
Related products
PRIMERGY CX400 S1Primergy CX400 S2
Fujitsu categories
Air Conditioner
Storage
Laptop
Server
Monitor
Printer
Scanner
Desktop
Motherboard
Microcontrollers
More Fujitsu categories
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved