Disassembly and Recycling Instructions - EnglishFUJITSU Server PRIMERGYCX400 M4 Server EnclosureCX25x0 M4/M5 Server NodesDisassembly and Recycling InstructionsDecember 2019

Fujitsu PRIMERGY CX25 0 M4 Series Disassembly And Recycling Document

PRIMERGY CX400 M4

server enclosure

copyright and trademarks

Introduction

Notational conventions

Before you start

Classification of procedures

Upgrade and Repair Units (URU)

Field Replaceable Units (FRU)

Average task duration

Tools you need at hand

Documents you need at hand

Documents for the server enclosure

Documents for the server nodes

Important information

ENERGY STAR

Environmental protection

Basic hardware procedures

Determining the error class

Global Error indicator

Shutting down the server node

Disconnecting the power cord

Extending/removing the server enclosure out of the rack

Extending the server enclosure out of the rack

Removing server nodes from the server enclosure

Removing the CX2570 M4 server node

Removing the server node dummy module

Opening the server enclosure

Opening the midplane cover

Installing the midplane cover

Installing the fan cover

Installing the server node dummy module

Installing the server node in the server enclosure

Installing the CX2550 M4/CX2560 M4 server node

Installing the CX2570 M4 server node

Mounting the server enclosure in the rack

Attaching the carrier rails to the server enclosure

Installing the carrier rails

Lift the server into the rack cabinet

Installing the cable management arm (CMA)

Connecting the power cord

Switching on the server node(s)

Basic software procedures

Completing the maintenance task

Verifying system information backup / restore

Using the Chassis ID Prom Tool

Viewing and clearing the System Event Log (SEL)

Clearing the SEL

Performing a fan test

Updating ServerView RAID Manager

Power supply unit (PSU)

General equipping rules

Replacing the hot-plug PSU

Removing the hot-plug PSU

Installing the hot-plug PSU

Concluding steps

Removing and installing the PSU dummy module

Installing the PSU dummy module

Hard disk drives (HDD), solid state drives (SSD) and 2.5-inch PCIe-SSD

Basic information

HDD/SSD install order

HDD/SSD backplane types

HDD/SSD cage bezels

Installing 2.5-inch HDD/SSD modules

Removing a 2.5-inch HDD/SSD dummy module

Installing a 2.5-inch HDD/SSD module

Removing 2.5-inch HDD/SSD modules

Removing a 2.5-inch HDD/SSD module

Installing a 2.5-inch HDD/SSD dummy module

Replacing a 2.5-inch HDD/SSD module

Preliminary steps

Replacing the 2.5-inch HDD/SSD SAS/SATA backplane

Removing the fan modules cage

Removing the 2.5-inch HDD/SSD backplane

Installing the 2.5-inch HDD/SSD backplane

Installing the fan modules cage

Installing the HDD/SSD bridge board

Replacing the HDD/SSD bridge board

Removing the HDD/SSD bridge board

Changing HDD/SSD cage bezels

Removing the HDD/SSD x6 front bezel

Removing the HDD/SSD x6 front bezel (screw type)

Removing the HDD/SSD x4 front bezel

Installing the HDD/SSD x6 front bezel

Installing the HDD/SSD x4 front bezel

System fan module

Replacing the system fan module

Removing the fan module

Documentation overview

Functional overview

Server enclosure specification

Installation steps, overview

FCC Class A Compliance Statement

Transporting the server enclosure

Notes on installing the server enclosure in the rack

Hardware installation

Unpacking the server enclosure

Installing/removing the server enclosure in/from the rack

Removing the server enclosure out of the rack

Connecting the server enclosure to the mains

Notes on connecting/disconnecting cables

Starting up and operation

Front overview with CX2560 M4 / CX2570 M4 server nodes

Rear overview with CX2550 M4 or CX2560 M4 server nodes

Rear overview with CX2570 M4 server nodes

Controls and indicators

Indicators on the front panel (enclosure-related)

Indicators on the front panel (node-related)

ID card

Indicators on the HDDs

Indicator on hot-plug PSU

Switching the multi-node server system on and off

Cleaning the server enclosure

Property and data protection

Troubleshooting and tips

Drives reported as "dead" when starting system

PRIMERGY CX25 0 M4 Series

PRIMERGY CX2550 M4

PRIMERGY CX2550 M5

PRIMERGY CX2560 M4

PRIMERGY CX2560 M5

PRIMERGY CX2570 M4

PRIMERGY CX2570 M5

Fujitsu PRIMERGY CX25 0 M4 Series Disassembly And Recycling Document

Product

Learn More

Legal