Kärcher HDS 7/12 M manuals

HDS 7/12 M

Brand: Kärcher | Category: Pressure Washer

Table of contents

1. Table Of Contents
2. Table Of Contents
3. Table Of Contents
4. Preface
5. Accessories
6. Parts of the system
7. View from the back, (device without hose reel)
8. View from the back, (device with hose reel)
9. Operator console
10. Template numerical value display
11. Control panel, view from the inside
12. Printed circuit board, control panel
13. Control panel with display indication (HDS 13/20 only)
14. Function
15. Setting liquid softener
16. Storage compartments
17. Cover
18. View from the right, cover removed
19. Revised device design (with filter before the pump and electronic ignition transformer)
20. Service switch
21. Fuel tank
22. Liquid softener
23. Feed via RFID (Europe variant)
24. Functionality RFID
25. Swimmer tank
26. Detergent Tank
27. Detergent tank 2
28. Detergent dosing valve
29. Motor (air-cooled)
31. Electrical box, air-cooled motor
32. Engine (water-cooled)
34. Electrical box, water-cooled engine
35. Pump
36. Revised version with filter before the pump
37. Safety block
38. Safety block (water shortage safeguard old)
39. Water shortage safeguard as cartridge
40. Function water shortage safeguard and dry-run protection
41. Burner blower with fuel pump
42. Booster heater (with ignition transformer)
43. Booster heater (with ignition transformer new)
44. Ignition transformer
45. Sectional view booster heater
46. Burner
48. Output, booster heater
49. Hand spraygun
50. Pressure and volume regulation
51. Functional diagram of pressure water operation (water-cooled motor)
52. Functional diagram vacuuming operation
53. Vacuuming operations
55. Function pressure and volume regulation
56. Functional description of pressure switch
57. The appliance is switched on and the gun is open
58. Gun is closed
59. The gun is reopened when the appliance is switched on
60. Basic settings and service procedures
61. Renew O-rings axle, hose reel
62. Uninstall / install pipeline with axle
63. Uninstall / install pressure gauge
64. Adjust safety valve
65. Service functions with LED display
66. Set up the switching off process
67. Brightness value of the flame sensor
68. RFID query
69. Testing the water temperature setting and the programme switch
70. Testing the service switch
71. Testing the sensor
72. Error memory
73. Operating hours
74. Gun switching operations since gun service
75. Gun services
76. Gun switches since initial startup
77. Operation duration of the burner since burner service
78. Burner service
79. Burner operation since initial startup
80. Operating hours of the pump since pump service
81. Pump service
82. Pump operation since initial startup
83. Servicefunktionen mit Displayanzeige
87. Testing the sensors
90. Operation duration of the burner since startup
91. Pump services
92. Quick overview for reading the service functions
93. Overview of a quick check of the device status
94. Settings, burner
95. Installation air duct on the outer jacket
96. Adjusting the working pressure with the rotary regulator on the gun
97. Setting the minimum working pressure
98. Setting the working pressure with standard gun without rotary knob
100. Troubleshooting
101. Error messages
102. Error message with service demand
103. Technical specifications
104. Special tools
105. Circuit diagram