Octel Aria 1.2 manuals

Aria 1.2

Brand: Octel | Category: Software

Table of contents

1. Edition
2. Table Of Contents
3. Table Of Contents
4. Table Of Contents
5. Table Of Contents
6. Features for Service Personnel
7. Features Administered by System Managers
8. Compatibilities With Applications
9. Multiline Networking
10. ASCII Name Verification
11. Control of MWI
12. TDD/TTY Support
13. Application Easy Access
14. Node Expansion
15. Overview
16. Check The Major Steps
17. Make Sure that the Correct Equipment is Available
18. Software
19. Verify the System Boot Area
20. Connect the PC and the Server
21. PC-to-Octel Overture 350 Direct Connection
22. Connecting the PC remotely to the server
23. Install the Online Upgrade Tool on the PC Hard Drive
24. PC's ONLINE UPGRADE Installation Program Screen
25. Verify the Values in the PC Setup Menu
26. Load Software and Phrase Diskettes on the PC Hard Drive
27. Copy/Delete UPG Menu
28. Verification Prompt
29. Status Messages Screen With File Copy Complete Message
30. Perform the Automatic Upgrade
31. Modem Setup Menu
32. Example of Status Messages Box With Confirmation Prompt
33. Verify the Upgrade
34. Reset the Boot Area, and Boot the New Software
35. Make Software and Phrase Areas Redundant
37. FLT-A Card and its Removal and Replacement
38. Example of Menu 13.11, Review Card Management
39. Conversion of Branch, Aspen, or Maxum to Octel Overture 250 Using PC Tape
40. Menu 20.1.5, Port Traffic Statistics Utility
41. Mixed 1-GB, 2-GB, and 4-GB Message Drives, and the Upgrade Message Drive Utility
42. Reset Mirrored Drive Status Utility
43. Collapse Nodes Utility
44. Example of the Node Collapsing Utility Screen
45. Revised Enable Drive Utility
46. Hot-Plug Replacement of Tape Drive in Octel Overture 250
47. Hot-Plug Addition of a Second System Drive in Octel Overture 250
48. Flash EPROMs on CCF Card
49. New Error Messages for Tape Drive Operations
50. PCR CORRECTIONS