OneStart

Menu

Samsung 136S manuals

136S first page preview

136S

Brand: Samsung | Category: Camera Accessories
Table of contents
  1. important safety instructions
  2. safety precautions
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. About this Manual
  9. Revision History
  10. Product Description
  11. Battery Module (Type A / Type B)
  12. Switchgear Assembly
  13. SMPS Assembly (Type A / Type B)
  14. Rack Frame
  15. Assembling the Product
  16. Installation and Assembly Procedure
  17. Preparation Stage—Procedure
  18. Preparation Stage - Unpacking
  19. Preparation Stage—Recommended Tools/Instruments
  20. Preparation Stage - Visual Inspection
  21. Visual Inspection of the Modules
  22. Rack Anchoring Stage
  23. Figure 3-3: Clearance Distance for Single Rack Frame
  24. Figure 3-5: Clearance Distance for Multiple Rack Frames Installed Rear-to-Rear
  25. Figure 3-6: Rack Anchoring Points (4 EA)
  26. Figure 3-9: Reattaching the Rear Panels
  27. Rack Installation Stage
  28. Switchgear and SMPS Assembly Installation
  29. Figure 3-12: Ground Cable Connection to the Switchgear Assembly
  30. Figure 3-13: Inserting SMPS Assembly
  31. Figure 3-15: Ground Cable Connection to the SMPS Assembly
  32. Battery Module Installation
  33. Figure 3-17: Battery Module Arrangement on Eighth and Ninth Shelves
  34. Figure 3-19 : Module Number
  35. Busbar Installation
  36. Figure 3-21: Removing the Module #1's Cover and Switchgear B- Terminal Cover
  37. Figure 3-23: Restore Switchgear's B- Terminal
  38. Figure 3-25: Connect Battery Module #1 B+ and Battery Module #2 B
  39. Figure 3-26: Reattach Battery Module #1's Front Cover
  40. Figure 3-28: Connect Battery Module #2 B+ and Battery Module #3 B
  41. Figure 3-29: Reattach Battery Module #2's Front Cover
  42. Figure 3-31: Connect Battery Module #3 B+ and Module #4 B
  43. Figure 3-32: Reattach Battery Module #3's Front Cover
  44. Figure 3-34: Connect Battery Module #4 B+ and Battery Module #5 B
  45. Figure 3-35: Reattach Battery Module #4's Front Cover
  46. Figure 3-37: Connect Battery Module #5 B+ and Battery Module #6 B
  47. Figure 3-38: Reattach Battery Module #5's Front Cover
  48. Figure 3-40: Connect Battery Module #6 B+ and Battery Module #7 B
  49. Figure 3-41: Reattach Battery Module #6's Front Cover
  50. Figure 3-43: Connect Battery Module #7 B+ and Battery Module #8 B
  51. Figure 3-44: Reattach Battery Modules #7 and #8's Front Covers
  52. Figure 3-46: Connect Battery Module #9 B+ and Battery Module #10 B
  53. Figure 3-47: Reattach Battery Module #9's Front Cover
  54. Figure 3-49: Connect Battery Module #10 B+ and Battery Module #11 B
  55. Figure 3-50: Reattach Battery Module #10's Front Cover
  56. Figure 3-52: Connect Battery Module #11 B+ and Battery Module #12 B
  57. Figure 3-53: Assemble Module #11's Front Cover
  58. Figure 3-55: Connect Battery Module #12B+ and Battery Module #13 B
  59. Figure 3-56: Assemble Module #12's Front Cover
  60. Figure 3-58: Connect Battery Module #13 B+ and Battery Module #14 B
  61. Figure 3-59: Reattach Battery Module #13's Front Cover
  62. Figure 3-61: Connect Battery Module #14 B+ and Battery Module #15 B
  63. Figure 3-62: Assemble Battery Module #14's Front Cover
  64. Figure 3-64: Connect Battery Module #15 B+ and Battery Module #16 B
  65. Figure 3-65: Reattach Battery Module #15's Front Cover
  66. Figure 3-67: Connect Battery Module #15 B+ and Battery Module #16 B
  67. Figure 3-68: Reattach Battery Module #15's Front Cover
  68. Figure 3-70: Connect Switchgear B+ and Module #17 B
  69. Module and Switchgear Signal Cable Connection
  70. Figure 3-73: Opening for Cable Installation
  71. Figure 3-75: Module #2 to Module #3 Signal Cabling
  72. Figure 3-77: Module #4 to Module #5 Signal Cabling
  73. Figure 3-79: Module #6 to Module #7 Signal Cabling
  74. Figure 3-81: Module #11 to Module #12 Signal Cabling
  75. Figure 3-83: Module #13 to Module #14 Signal Cabling
  76. Figure 3-85: Module #15 to Module #16 Signal Cabling
  77. SMPS Assembly and Switchgear Power Cable Connection
  78. SMPS Assembly and Switchgear Signal Cable Connection
  79. SMPS Assembly AC Input Connection
  80. Rack Fuse and Additional Module Signal Cable Connection
  81. DC Link Cable Connection
  82. AC Input Commissioning
  83. Performance
136S first page preview

136S

Brand: Samsung | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. About this Manual
  9. Revision History
  10. Acronyms and Abbreviations
  11. Product Description
  12. Battery Module (Type A / Type B)
  13. Figure 2-2: Battery Module Type B
  14. SMU (String Management Unit)
  15. Table 2-1: Extra Auxiliary Breaker Switch Connector Description
  16. Table 2-2: Terminal Block Description
  17. SMPS Assembly (Type A / Type B)
  18. Figure 2-8: SMPS Assembly Type B
  19. Figure 2-12: Front View of SMPS Assembly Type B, 1-Phase Input
  20. Table 2-3: RS485 Connector Description
  21. Table 2-5: Dry Contact Connector Description
  22. Table 2-8: Dry Contact Operation (Customer ID = 0)
  23. Rack Frame
  24. Installing the Product
  25. Arc Flash Calculations
  26. Installation Procedure
  27. Table 3-1: Estimated time for installation (based on 136S 3P installation)
  28. Preparation Stage—Procedure
  29. Preparation Stage—Unpacking
  30. Preparation Stage—Ground Wire and Tools
  31. Preparation Stage—Recommended Tools/Instruments
  32. Preparation Stage—Visual Inspection
  33. Inspecting the SMPS assembly
  34. Rack Anchoring Stage
  35. Figure 3-2: Clearance Distance for Single Rack Frame
  36. Figure 3-4: Clearance Distance for Multiple Rack Frames Installed Side-by-Side and Rear-to-Rear
  37. Figure 3-6: Front panel hooks (four)
  38. Figure 3-8: Side panel hooks (four)
  39. Figure 3-10: Rear panel hooks (four)
  40. Figure 3-12: Holes on the sides of the rack (six)
  41. Figure 3-13: Reattaching the Side Panels (four hooks and six screws for each panel)
  42. Figure 3-14: Reattaching the Rear Panels
  43. Rack Installation Stage
  44. Front Door Removal
  45. Figure 3-17: Removing the front door
  46. SMU and SMPS Assembly Installation
  47. Figure 3-21: Ground Cable Connection to the SMU
  48. Figure 3-22: Inserting SMPS Assembly
  49. Figure 3-24: Ground Cable Connection to the SMPS Assembly
  50. Battery Module Installation
  51. Figure 3-26: Battery Module Arrangement on the Eighth Shelf
  52. Figure 3-28 : Module Number
  53. Fuse-Busbar Assembly
  54. Figure 3-32: Fuse Busbar Left Assembly
  55. Figure 3-34: Fuse Busbar Right Assembly
  56. Busbar Installation
  57. Figure 3-36: Removing the Module #1's Cover and SMU B- Terminal Cover
  58. Figure 3-38: Restore SMU's B- Terminal
  59. Figure 3-40: Connect Battery Module #1 B+ and Battery Module #2 B
  60. Figure 3-42: Remove Battery Module #2's Front Cover
  61. Figure 3-44: Reattach Battery Module #2's Front Cover
  62. Figure 3-46: Connect Battery Module #3 B+ and Module #4 B
  63. Figure 3-47: Reattach Battery Module #3's Front Cover
  64. Figure 3-49: Connect Battery Module #4 B+ and Battery Module #5 B
  65. Figure 3-50: Reattach Battery Module #4's Front Cover
  66. Figure 3-52: Connect Battery Module #5 B+ and Battery Module #6 B
  67. Figure 3-53: Reattach Battery Module #5's Front Cover
  68. Figure 3-55: Connect Battery Module #6 B+ and Battery Module #7 B
  69. Figure 3-56: Reattach Battery Module #6's Front Cover
  70. Figure 3-58: Connect Battery Module #7 B+ and Battery Module #8 B
  71. Figure 3-60: Remove Battery Modules #9's Front Cover
  72. Figure 3-61: Connect Battery Module #8 B+ and Battery Module #9 B
  73. Figure 3-63: Remove Battery Modules #10's Front Cover
  74. Figure 3-65: Reattach Battery Module #9's Front Cover
  75. Figure 3-67: Connect Battery Module #10 B+ and Battery Module #11 B
  76. Figure 3-68: Reattach Battery Module #10's Front Cover
  77. Figure 3-70: Connect Battery Module #11 B+ and Battery Module #12 B
  78. Figure 3-71: Reattach Module #11's Front Cover
  79. Figure 3-73: Connect Battery Module #12B+ and Battery Module #13 B
  80. Figure 3-74: Reattach Module #12's Front Cover
  81. Figure 3-76: Connect Battery Module #13 B+ and Battery Module #14 B
  82. Figure 3-77: Reattach Battery Module #13's Front Cover
  83. Figure 3-79: Connect Battery Module #14 B+ and Battery Module #15 B
  84. Figure 3-80: Reattach Battery Module #14's Front Cover
  85. Figure 3-82: Connect Battery Module #15 B+ and Battery Module #16 B
  86. Figure 3-83: Reattach Battery Module #15's Front Cover
  87. Figure 3-85: Connect Battery Module #16 B+ and Battery Module #17 B
  88. Figure 3-86: Reattach Battery Module #15's Front Cover
  89. Figure 3-88: Connect SMU B+ and Module #17 B
  90. Module and SMU Signal Cable Connection
  91. Figure 3-91: Module #1 to Module #2 Signal Cabling
  92. Figure 3-93: Module #3 to Module #4 Signal Cabling
  93. Figure 3-95: Module #5 to Module #6 Signal Cabling
  94. Figure 3-97: Module #7 to Module #8 Signal Cabling
  95. Figure 3-99: Module #9 to Module #10 Signal Cabling
  96. Figure 3-101: Module #11 to Module #12 Signal Cabling
  97. Figure 3-103: Module #13 to Module #14 Signal Cabling
  98. Figure 3-105: Module #15 to Module #16 Signal Cabling
  99. Figure 3-107: Pre-Punched Hole for Signal Cable
  100. Figure 3-108: Signal Cabling Examples of Left Alignment of SMU
  101. Figure 3-109: Termination Resistor Setting for Last SMU
  102. SMPS Assembly and SMU Power Cable Connection
  103. SMPS Assembly and SMU Signal Cable Connection
  104. Figure 3-114: Dry Contact Cable Connection to SMPS Assembly
  105. SMPS Assembly AC Input Connection
  106. Figure 3-118: AC Input Terminals of SMPS Assembly 1 Phase Type A
  107. Figure 3-120: SMPS Assembly 3 Phase Type A - AC Input Terminals with Cables Attached
  108. Figure 3-122: SMPS Assembly 1 Phase Type A - AC Input Terminals with Cables Attached
  109. Figure 3-125: AC Input Terminals of SMPS Assembly 3 Phase Type B
  110. Figure 3-127: AC Input Terminals of SMPS Assembly 1 Phase Type B
  111. DC Link Cable Connection
  112. Figure 3-129: Connecting the DC Link High Current Terminals
  113. AC Input Commissioning
  114. BMS Configuration
  115. Table 3-11: Rack BMS Configuration Cable Pin Map
  116. Table 3-12: System BMS Configuration Cable Pin Map
  117. Table 3-13: System BMS Communication Cable Pin Map
  118. Figure 3-133: BATTMON Splash Window
  119. Figure 3-135: BATTMON Splash Window
  120. Figure 3-138: BATTMON Splash Window : Warning Pop-up Window
  121. Figure 3-141: Cable Connections for Rack BMS Configuration
  122. Figure 3-143: Rack BMS termination switch and CAN cable connection
  123. Figure 3-145: BATTMON Splash Window
  124. Figure 3-147: Rack BMS Config Setting window
  125. Figure 3-148: Cable Connections for System BMS Configuration
  126. Figure 3-150: BATTMON Splash Window
  127. Figure 3-152: System BMS Install Setting Window
  128. Communication Check
  129. Figure 3-154: Open "Network and Sharing Center
  130. Figure 3-156: Open "Properties" for "Local Area Connection
  131. Figure 3-158: Setting the Computer's IP address
  132. Figure 3-159: BATTMON Icon
  133. Figure 3-162: System and Rack Information
  134. Figure 3-164: Cell Information
  135. Reinstall the Front Door
  136. Reinstall the Front Panel
  137. Switching on the MCCB
Related products
SCC-101SHG-120STH-160PO16mm F2.4SBO-100B1STH-160PISTH-128PESTH-1000POSHG-120/220SCU-VAC
Samsung categories
Air Conditioner
Washer
Cell Phone
TV
LED TV
LCD TV
Monitor
Refrigerator
Microwave Oven
UHD TV
More Samsung categories
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved