red lion 700 series Installation And User Manual

Contents

red lion 700 series Installation And User Manual Manual pdf 8 page image

REVISED 2016-01-191.1.2.1 Identity ObjectThe identity object class (Class code = 0x01) and instance attributes are implemented as definedby CIP Vol 1, 5-2 [1]. There is one instance (1) of this object. Service code (0x32) will get allattributes, including optional attributes. The following table summarizes the attributes in theIdentity object.Id Name Set Format Description1 Vendor ID UINT (16) 1006. This is N-Tron’s ODVA EtherNet/IPVendor ID.2 Device Type UINT (16) 0x0C. Communications Adapter3 Product Code UINT (16) Switch product code:708TX = 701708FX2 = 703716TX = 705716FX2 = 7067018TX = 7087018FX2 = 709708M12 = 710711FX3 = 7117010TX = 713709FX = 714710FX2 = 715714FX6 = 717712FX4 = 7187012FX2 = 7197026TX = 7207900 = 722716M12 = 7237506GX2 = 75064 Major Revision USINT (8) Major version of CIP implementation.Minor Revision USINT (8) Minor version of CIP implementation.5 Status WORD (16) Summary status of device. Bits:Bit 0 If set, device has an ownerBit 1 reservedBit 2 If set, device has non-defaultconfigurationBit 3 reservedBits 4-7 Extended device status – not usedBit 8 Minor recoverable faultBit 9 Minor unrecoverable faultBit 10 Major recoverable faultBit 11 Major unrecoverable faultBits 12-15 reserved(see fault table below)6 Serial Number UDINT (32) Serial number of the device. This is the last4 octets of the base switch MAC.7 Product Name SHORT_STRING Switch Model Number.EX: 7018FX2N-Tron® Series 700/7000 Switch CIP™ Manual -3-