red lion 700 series Installation And User Manual

Contents

red lion 700 series Installation And User Manual Manual pdf 36 page image

REVISED 2016-01-19Configuration_Control DINT Interface control flagsPath_Size INT Size of PathObject_Path_1 INTLogical segments identifying the physicallink objectObject_Path_2 INTLogical segments identifying the physicallink objectIP_Address DINT The device’s IP address.Network_Mask DINT The device’s network maskGateway_Address DINT Default gateway addressName_Server_1 DINT Primary name serverName_Server_2 DINT Secondary name serverDomain_Name STRING Default domain nameHost_Name STRING Host name3.4.3 Ethernet Link ObjectData Type: UDT_NTRON_CIP_Ethernet_Link_v0Name Data Type DescriptionInterface_Speed DINTInterface speed currently in use. Speedin Mbps (e.g., 0, 10, 100, 1000, etc.)Interface_FlagsUDT_NTRON_CIP_Interface_Flags_v0 Interface status flagsPhysical_Address SINT[6] MAC layer addressInOctets DINT Octets received on the interfaceInUcastPackets DINTUnicast packets received on theinterfaceInNucastPackets DINTNon-unicast packets received on theinterfaceInDiscards DINTInbound packets received on theinterface but discardedInErrors DINTInbound packets that contain errors(does not include In Discards)InUnknownProtos DINTInbound packets with unknownprotocolOutOctets DINT Octets sent on the interfaceOutUcastPackets DINT Unicast packets sent on the interfaceOutNucastPackets DINTNon-unicast packets sent on theinterfaceN-Tron® Series 700/7000 Switch CIP™ Manual -31-