4 JCB-18BLDDInstruction & User ManualRead all safety warnings, instructions andspecifications provided with this powertool. Failure to follow all instructions listed belowmay result in electric shock, fire and/or seriousinjury. Save all warnings and instructions forfuture reference.WARNING!The term “power tool” in the warnings refers toyour mains operated (corded) power tool or batteryoperated (cordless) power tool.1. Work area safetym Keep work area clean and well lit.Cluttered or dark areas invite accidents.m Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Powertools create sparks which may ignite the dust orfumes.m Keep children and bystanders away whileoperating a power tool. Distractions cancause you to lose control.2. Electrical safetym Power tool plugs must match the outlet.Never modify the plug in any way. Donot use any adapter plugs with earthed(grounded) power tools. Unmodified plugsand matching outlets will reduce risk of electricshock.m Avoid body contact with earthed orgrounded surfaces, such as pipes,radiators, ranges and refrigerators. Thereis an increased risk of electric shock if your bodyis earthed or grounded.m Do not expose power tools to rain or wetconditions. Water entering a power tool willincrease the risk of electric shock.m Do not abuse the cord. Never use thecord for carrying, pulling or unpluggingthe power tool. Keep the cord away fromheat, oil, sharp edges or moving parts.Damaged or entangled cords increase the risk ofelectric shock.m When operating a power tool outdoors,use an extension cord suitable foroutdoor use. Use of a cord suitable foroutdoor use reduces the risk of electric shock.m If operating a power tool in a damplocation is unavoidable, use a residualcurrent device (RCD) protected supply.Use of an RCD reduces the risk of electric shock.3. Personal safetym Stay alert, watch what you are doingand use common sense when operatinga power tool. Do not use a power toolwhile you are tired or under the influenceof drugs, alcohol or medication. A momentof inattention while operating power tools mayresult in serious personal injury.m Use personal protective equipment.Always wear eye protection. Protectiveequipment such as a dust mask, non-skid safetyshoes, hard hat or hearing protection used forappropriate conditions will reduce personalinjuries.m Prevent unintentional starting. Ensurethe switch is in the off position beforeconnecting to power source and/orbattery pack, picking up or carrying thetool. Carrying power tools with your finger onthe switch or energising power tools that havethe switch on invites accidents.GENERAL POWER TOOL SAFETY WARNINGS