Menu
easyteck G501 Quick Start Manual
     |
GENERAL INTRODUCTIONThis phone adopts the up-to-the-minute integrated circuit, with superior craftwork and stablecapability. Please read the manual carefully for proper use.SAFETY INSTRUCTIONWhen using your telephone, please follow these basic safety precautions to reduce the risk offire, electric shock or injury to persons.1. Read and understand all instructions.2. Follow all warnings and instructions marked on the products.3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners oraerosol cleaners. Use a damp cloth for cleaning.4. Do not use this product near water (for example, near a bath tub, kitchen sink or swimmingpool).5. Do not place this product on an unstable cart, stand, or table. The product may fall, causingserious damage to the product.6. Never spill liquid of any kind on the product.7. To reduce the risk of electric shock, do not disassemble this product. If service or repairwork is required, contact your qualified technician.8. Do not use the telephone to report a gas leak in the vicinity of the leak.FUNCTIONSDesk/wall mountableLast number redialFlash functionPause functionOPERATION1) Preparation1.1 Connect the line plugs into phone line jack and the other plug to connect to the wall jack.1.2 Insert the handset coil cord into the phone jack at the bottom.2) ReceivingAs it rings, pick up the handset from the cradle to receive, and put back the handset to hang upto end the conversation.3) DialingPick up the handset, dial the desired number as hearing the dialing tone, then if you hear thelong tone like “do—do”, the line has got through. If you hear the short tone like “do... do... do”,busy tone, you could press the hook switch then press REDIAL to dial it out again after sometime. You could repeat the above process till getting the line through.4) RedialPress the REDIAL button the unit will redial the last number automatically.5) PauseIf you want to dial out the extension phone, press shift key (normally “0” or ”9”) + PAUSE +desired number, then you could just press REDIAL to dial out when the dialed number is busy. |
Related manuals for easyteck G501
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved