Menu
easyteck G101 Quick Start Manual
      |
CAUTIONS:1. To locate the phone set base in a dry and ventilated place without corrosive air.2. Before operation pls check if you had imply caller ID service to telecom office. Otherwise,the phone set fails to receive the incoming call number normally. But this can not effectthe use of its normal function.FEATURES：• FSK/DTMF dual system• 61 incoming call memories, call back function• 16 outgoing call memories and conversation time review and redial back• Local area code filter• LCD display of month, date and time• 5 levels of LCD contrastOPERATION:1.Function setting:Press and hold SET key to enter menu setting, the phone LCD will display SET 1 DATE,press UP key to select different options. Press SET key again to confirm. Use UP key toselect the mode you need. After completing the setting, press SET key to go to the next item.To exit menu, press DEL key.By pressing SET key (in the on-hook mode), you can select the following:SET ITEM OPERATIONSDATE/TIME LCD panel displays SET 1 DATE, press SET key to enter this mode.The year value would flash, use UP key to select value, then press SETkey to move to next item.AREA CODE LCD panel display SET 2 CODE, press SET key to confirm, LCDdisplay CODE, press SET key to enter this mode. Use UP key to selectvalue, then press SET key to move to next item.Area Code is used to filter the number for incoming calls. E.g. Areacode = 75 when there’s incoming call with 75 6554556, it will bedisplayed as 655 4556 only.PABX CODE LCD panel display SET 3 PCODE, press SET key to enter this mode.LCD displays PCODE, use UP key to select value, then press SET keyto confirm.To activate this feature, while on-hook, dial the number then pressREDIAL/BACK. When the first number matches the PCODE, the |
Related manuals for easyteck G101
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved