barfield DPS1000 User Instruction Manual

Also see for DPS1000: User instruction manual User instruction manual User instruction manual

Contents

barfield DPS1000 User Instruction Manual Manual pdf 29 page image

56-101-01175 Revision H Page | 294. PREPARATIONThe DPS1000 has been designed with a user friendly GUI “Graphical User Interface” whichprovides an intuitive understanding of the man/machine interaction thereby greatlysimplifying the learning experience. However, we still STRONGLY RECOMMEND that theuser becomes familiar with the DPS1000 operations and menu structure before connectingit to an aircraft system or instruments and/or performing any tests.The test procedures are described in place of any specifications by either the airframe or theinstrument manufacturer. Particular attention should be addressed to the preliminaryprocedures so as to avoid erroneous test results and to preclude any risk of damage to theaircraft or Test Set instruments. The ports on the Test Set and mating hoses are color-coded to help prevent accidental crossing of Pitot and Static hoses.Each Test Set is completely calibrated and tested before shipment. However to ensure theintegrity of the tests, the DPS1000 should be leak checked before each use. To helpautomate this process, use the predefined ATP Test Set–only.WARNING: Observe aircraft and equipment servicing procedures as well as safetyprecautions detailed in the AMM “Aircraft Maintenance Manual”, CMM“Component Maintenance Manual” and procedures and practices stated inlocal orders.5. POWER ON INITIALIZATIONA. Set power switch to ON. After approximately 7 seconds, the display will indicate“DPS1000” during the initial boot-up process. The following, or similar screens will appearduring the Test Set initialization:Figure 18 Power On Initialization DisplayB. During the DPS1000 power ON initialization process the information is both displayedand written to a log file. The log file provides the ability to go back and view theinitialization process and results if needed. The log file can be viewed at a later time bygoing to the Menu sequence Main Menu , Page 2 , Page 3 , Log File, CurrentHistory.Note: The “Current History” log file contains logged information for the current poweredON session.