|
1 - 11Hardware/Software Section 3- Installation CD-ROM DriveWEARNES (For CDD-110)DEVICE=C:\CDD110\CDD.SYS /D:MSCD001 /P:340 /M:S /VDEVICE=C:\CDD110\CDD.SYS /D:MSCD001 /P:340 /M:3 /I:11 /VAfter you install the device driver, you can addC:\DOS\MSCDEX.EXE /D:MSCD001in AUTOEXEC.BAT or execute on DOS prompt.3.3 How to play CD-Audio in MS-Windows 3.1 ?After you did above installing CD-ROM software driver, you can install MCICD audio driver in MS-Windows 3.1 to play general CD audio disk.1. Launch Windows.2. Select the "MAIN" group.3. Click twice on the "CONTROL PANEL" icon.4. Click twice on the "DRIVERS" icon.5. Click at the "Add" button.6. Highlight "[MCI] CD Audio" and then click "OK".7. And then follow MS-Windows indicate step to add driver.8. After install O.K., please use "MEDIA PLAYER" to play your CD audio disk.Note : Please refer MS-Windows user's or reference guide for more details.
|
