Zodiac Vortex 3 Owner's Manual

Also see for Vortex 3: Instructions for installation and use Instructions for installation and use

Contents

Zodiac Vortex 3 Owner's Manual Manual pdf 8 page image

1Figure 12. Position the locking Plate Clips3. Secure the locking plate using Phillips headscrews. Do not overtighten. Refer to Figure 13.2Figure 13. secure the locking Plate7. Place two (2) caps on the wheels as shown inFigure 9.Figure 9. Attaching Wheel Caps8. Attach the support blocks to the caddy usingfour (4) screws as shown in Figure 10.Figure 10. Attaching the support Blocksx49. The transport caddy is now ready to use asshown in Figure 11.Figure 11. Transport and storage Caddy Assembled3.3 Connecting the Control unit to theCaddy1. Position the control unit over the control unithook on the caddy.2. Slide the locking plate clips into the controlhook and line up the screw holes. Refer toFigure 12.Page 8 ENGLISH Zodiac ® Vortex™ 3, Vortex 4 Robotic Pool Cleaner | Owner's Manual