Zodiac VORTEX-PRO VX40 Owner's Manual

Also see for VORTEX-PRO VX40: Owner's manual

Contents

Zodiac VORTEX-PRO VX40 Owner's Manual Manual pdf 14 page image

Section 5. Programming theCleaner(VX50 4WD and VX55 4WD)The control box allows you to program the cleaner to runeach day for up to 7 days, perfect for when you go awayon holidays. (It is not recommended that you keep yourcleaner in the pool for unecessary periods of time when notrunning.)NOTE: You cannot change programming or display currentday and time during a cleaning cycle.5.1 Displaying Current Day and Time• Press to display current day and time in24-hour clock format.Current day and time is displayed for 5 seconds.5.2 Changing the Clock Day and Time1. Press and hold for three (3) seconds.All days of the week flash twice.2. Press or buttons to cycle throughseven (7) days and display desired day.3. Press to select.Current hour setting flashes.4. Press or buttons to cyclethrough 24 hours and display desired hoursetting.NOTE: Control box is set to display time in 24-hourclock format. Time setting will cycle through 1-24.5. Press to select.Current minutes setting flashes.6. Press or buttons to cyclethrough 1-59 minutes and display desiredminutes setting.7. Press to select.8. Press to set time and exit the menu.9. Press to display current day and timesetting and verify the time you set is correct.5.3 Changing Default Cleaning TimesUse to change cleaning surface setting.Default cleaning times are:Floor Only: 1 hour 30 minutesFloor and Walls:2 hours 30 minutesWaterline (VX55 4WD only):Variable cleaning time depending on settings1. Press or buttons to increase ordecrease cleaning time in 30-minute increments.2. Press to select.H0516700_REV A14