ZI-HS8PTDISCONNECT THE LOG SPLITTERFROM THE POWER SOURCE PRIOR TOANY CHECKS, MAINTENANCE, UPKEEPETC...!SHARPENING WEDGEThis log splitter is equipped with reinforcedsplitting wedge which blade is speciallytreated, After long periods of operation, andwhen required; sharpen the wedge using afine-toothed file removing any burrs or flatspots on the edge.TROUBlE SHOOTING9MOTOR DOES NOT STARTLOG SPLITTER DOES NOT WORK - MOTOR RUNNINGProbable causeValve is not opened owingto the connection partsloosening.Control levers or Connec-tion parts bentLower hydraulic oil levelSolutionCheck and tighten theparts.Repair the bent partsCheck and refill hydraulicoilProbable causeNo current in the socket:Extension cord defect:Incorrect connection line3N~400V:Switch or capacitator de-fective:SolutionCheck mains fuseUnplug, check, replace5-line connection at1.5mm2 requiredHave this checked by anelectrician.ABNORMAL VIBRATION NOICEProbable causeLower hydraulic oil level:SolutionCheck and refill hydraulicoilINCORRECT MOTOR ROTATION DIRECTIONProbable causeIncorrect connection:SolutionChange poles by switchingthe pole switching devicein the plug with a screwdriver by 180°Let polarity be reversed byan electrician.EN