20Deleting IPCsSteps Screenshot1. Choose Menu > Camera.2. Select the IPC you want to deleteand then click Delete.Note:If storage resource has been configured for theIPC, you need to delete the configured storageresource first before you can delete the IPC. Fordetails about how to delete storage resource,refer to Deleting Storage Resources.Configuring Channel ParametersThe admin can configure digital channels. Channel configuration includes the following: Camera configuration: Set camera parameters so that cameras can be used. Audio/video configuration: Set parameters including audio encoding parameters and video encodingparameters. Encoding configuration: Set parameters of video streams according to different stream profilessupported by the device. OSD configuration: Set parameters such as mask area and On-Screen Display (OSD) contents. ROI configuration: Set ROI to gain a clearer view of objects in certain regions.NOTE! The device can be completely configured only after the system has obtained model information about thedevice. The system can obtain device model information in the following way: A device added to thesystem for the first time needs to go online. If the device once went online but is currently offline, thesystem can also obtain the model information about the device. The tab pages and parameters to be set may vary, depending on the device type.
