PIP CONNECTIONS AND OPERA TIONINTRODUCTIONYour TV must be connected to two separate sources in order to view adifferent picture in the PIP inset from that which is showing in themain picture area of the TV. One source (such as an antenna) must beconnected to the ANTENNA/CABLE jack. The other source (such as aVCR) must be connected to the AUX INPUT jacks. If you have not al-ready selected the input sources for your main TV picture and the PIP win-dow, refer to the instructions below.Source_ Menu[Main SourcePIP SourceI [Antenna/Cable:Main picture source1. Show Source Menu on theTV.2. Select Main Source.3. Press the Left or Right arrowrepeatedly to showAntenna/Cable.PIP picture source*1. Show Source Menu on theTV.2. Select PIP Source.3. Press the Left or Right arrowrepeatedly to show Video.* A PIP window appears during Source Menu operations to showthe effect of choosing a PIP source.Source of mainpicture showshere.Source of PIP pictureshows here.Main Picture AreaPIP WindowPIP FUNCTIONSThe remote control keys which are most frequently used for PIP operations are shown here. In addition to these, other keys on theremote such as the CHANNEL Up/Down keys may affect the PIP window, depending on your source selection.PIP FunctionsD Arrow Keys: Use the Left/Right and Up/Down arrow keys tomove the PIP window to the desired location of the TV screen.D SWAP: Press the SWAP key to swap the main picture withthe PIP window. Press SWAP again to return to the originaldisplay.I:1 PIP On/Off: Press the PIP key to display the PIP window.Press it again to remove the PIP window.O FREEZE: Press FREEZ to freeze motion of the pictureshown in the PIP window. Press FREEZ again to return to alive PIP window.O SOURCE: When the PIP window is on, SOURCE selects thesource for the PIP window.D PIP Size: Select Size in the PIP Menu to choose betweenseeing a small or large PIP window.Arrow KeysSWAPPIP(On/Off)FREEZSOURCE3050-B 11 -- 1