SETUP MENUTo Access SETUP MENU SETUPRefer to the "Quick Reference to On-Screen Menus" section for details.Before Using SETUP MENUConnect and turn ON all external equip-ment, such as cable TV decoder, VCR,etco before using any item on the SETUPMENU.-> AUTO PROGRAMCH. ADD/DELTUNING BANDAUTO TUNINGCLOCK SETCAPTIONSMENUSTARTAUTO PROGRAMPurposeFinds all available channels and stores them in the memory ofthe TV for access by CHANNEL (CH) Up/Down.Use AUTO PROGRAM only when you first install your TV,or when you permanently change the connections to the TV.For example, when you replace the antenna with a cable-TVsystem.To Use AUTO PROGRAMPress ADJUST (ADJ) Left/Right to start AUTO PROGRAM.SETUP MENU•-> AUTO PROGRAMCH. ADD/DELTUNING,BANDAUTO TUNINGCLOCK SETCAPTIONSSTARTAUTO PROGRAM HAS COMPLETEDTUNING BAND ISCHANNELS FOUNDStatus When Search is CompleteWhen Some Channels Are Not FoundAUTO PROGRAM finds only active channels and storesthem in the favorite channel memory. You can add channels tothose stored in memory by using the CH. ADD/DEL option.Selecting Auto ProgramCH. (Channel) ADD/DELPurposeLets you add channels to and remove channels from the activechannels found when using the AUTO PROGRAM option. Inthis way you can customize the channels that are accessedthrough CHANNEL (CH) Up/Down.To Add a Channel to Scan Sequence1. Use numbered buttons to select the channel you wishto add.2. Add channel by pressing ADJUST (ADJ) Left/Rightuntil the display shows ADD.To Delete a Channel from Scan SequenceI. Use numbered buttons to select the channel you wishto delete.2. Delete channel by pressing ADJUST (ADJ)Left/Right until the display shows DEL.SETUP MENUAUTO PROGRAM-)' CH. ADD/DELTUNING BANDAUTO TUNINGCLOCK SETCAPTIONSCH 13 ADDSelecting Ch. Add/Del273,-o 8 -- 1